解决方案

停剪电控系统

停剪工艺流程:
      钢卷由行车从钢卷库吊到钢卷备料台上,然后由钢卷小车送到开卷机卷筒上,卷筒涨开使钢卷固定在卷筒上,拆掉捆带,借助开卷机,将带头引入夹送装置中,输送到矫直机装置整平后,送入活套,经侧导,伺服定尺、剪切,剪切后的板材由皮带输送机送到一号或二号堆垛机堆垛,然后打包、称重、入库,等待发运。

具体流程如下:
     上料→ 开卷→ 矫直→ 活套→ 剪切→ 输送→ 码垛→ 打包。
 
Process of chasing shear
Coil is hung from coilw arehouse to coil preparati on stage by the bridge crane, and then it is sent to the uncoiler reel by the coilcar. The reelopens so that the coilis fixed on the roll . The strap is removed.Utilizing the unwinding device,the lead is introduced into the pinch device and then transported to the rough leveler. The operation is proceeded utilizing the lopper through side guide pair, ( film ) , slitting shear ( cutting edge) ,looper, tensionreel,and shearing.

The specific procedures are as follows
Feeding →uncoiling →straightening→ shearing→boper→ transporting →stacking → packing